Garmin RINO 700 Owner's Manual

Also see for RINO 700: Owner's manual

Contents

Garmin RINO 700 Owner's Manual Manual pdf 8 page image

CBRS/PRS channels in Australia and New Zealand. If thebattery level is too low to support transmissions using higherpower levels, the value of this setting decreasesautomatically.Squelch Tone Mode: Sets the squelch mode (Changing theSquelch Tone Mode, page 2).Advanced Radio SetupFrom the radio app, select > Setup Radio > AdvancedSetup.Headset Type: Sets the type of accessory headset ormicrophone you are using with the device (Headsets andMicrophones, page 9).VOX Level: Sets the sensitivity of a connected Voice OperatedTransmission (VOX) accessory. A lower VOX setting isrecommended for quiet environments, and a higher VOXsetting is recommended for noisy environments.Repeater Channel: Enables the GMRS repeater channels inthe US, and the CBRS/PRS repeater channels in Australiaand New Zealand. GMRS repeater channels are notavailable in Canada (Repeater Channels, page 3).NavigationYou can navigate routes and tracks to a waypoint, geocache, orany saved location in the device. You can use the map or thecompass to navigate to your destination.Navigating to a Destination1 From the home screen, select .2 Select a category.3 Select a destination.4 Select Go.The map opens, and your route is marked with a dashed line.5 Navigate using the map (Navigating with the Map, page 4)or compass (Navigating with the Compass, page 4).Finding a Location Near Another Location1 From the home screen, select Where To?.2 Select > Search Near.3 Select a criteria to center your search, such as A Waypoint.4 Select a location.Stopping NavigationFrom the map or compass, select > Stop Navigation.Navigating with the Map1 Begin navigating to a destination (Navigating to aDestination, page 4).2 From the home screen, select Map.A triangle represents your location on the map. As you travel,the triangle moves and leaves a track log (trail).3 Complete one or more actions:• Use the Thumb Stick controller to move the cursor on themap to view different areas.• Hold , and use the Thumb Stick controller to zoom inand out of the map.• Select a location on the map (represented by a pin) withthe cursor, and press the Thumb Stick controller to viewinformation about the selected location.Navigating with the CompassWhen navigating to a destination, points to your destination,regardless of the direction you are moving.1 Begin navigating to a destination (Navigating to aDestination, page 4).2 From the home screen, select Compass.3 Turn until points toward the top of the compass, andcontinue moving in that direction to the destination.Course PointerThe course pointer is most useful when you are navigating toyour destination in a straight line, such as when you arenavigating on water. It can help you navigate back to the courseline when you go off-course to avoid obstacles or hazards.To enable the course pointer, from the home screen, selectSetup > Heading > Go To Line (Pointer) > Course.À Course line pointer. Indicates the direction of the desired course linefrom your starting point to your next waypoint.Á Course deviation indicator (CDI). Indicates the location of thedesired course line in relation to your location. If the CDI is alignedwith the course line pointer, you are on course.Â Course deviation distance. The dots indicate your distance offcourse. The distance represented by each dot is indicated by thescale in the upper-right corner.Ã To-and-from indicator. Indicates whether you are headed to or fromthe next waypoint.Navigating Using TracBack®While navigating, you can navigate back to the beginning of yourcurrent track. This can be helpful when finding your way back tocamp or the trail head.1 From the home screen, select Where To? > Tracks >Current Track > Tracback.The map displays your route with a dashed line, start point,and end point.2 Navigate using the map or the compass.WaypointsWaypoints are locations you record and store in the device.Waypoints can mark where you are, where you are going, orwhere you have been. You can add details about the location,such as name, elevation, and depth.You can add a .gpx file that contains waypoints by transferringthe file to the GPX folder (Transferring Files to Your Device,page 10).Marking Your Current Location as aWaypointYou can mark your current location as a waypoint.1 From the home screen, select Mark Waypoint.2 Select the symbol, the name, or the notes field to add detailsabout the waypoint (optional).3 Select for more waypoint options (optional).4 Select Done.Finding a Waypoint1 From the home screen, select Waypoint Manager.2 If necessary, select to narrow the search.4 Navigation