Rino ® 110 Owner’s Manual 65U NIT OPERATION > SETUP PAGESPosition Format—allows you to choose from differentgrid formats. The default position format, hddd°mm.mmm displays the latitude and longitude in degrees andminutes and is most commonly used. The followingadditional formats are available:hddd.ddddd°—latitude/longitude in decimal degrees;hddd°mm.mmm’—latitude/longitude in decimalnumbers; hddd°mm’ss.s”—latitude/longitude in degrees,minutes, seconds; British Grid; Dutch Grid; EOVHungarian Grid; Finnish Grid; German Grid; IcelandicGrid; India Zones; Irish Grids; Loran TD; Maidenhead;MGRS; New Zealand; QNG Grid; RT90; South AfricanGrid; Swedish Grid; Swiss Grid; Taiwan Grid; USNational Grid; UTM/UpS—Universal TransverseMercator / Universal Polar Stereographic grids; WMalayan RSO; and User UTM Grid.LORAN TD FormatWhen creating new waypoints using LORAN TDcoordinates, you must set the correct LORAN chainnumber and secondary stations in the Setup TD fieldbefore storing the waypoint. After the waypoint is storedin unit memory, it always references the LORAN chainnumber and secondary stations currently selected in theSetup TD field. If you enter a different LORAN chainnumber or change the secondary stations or offsets in theSetup TD field, the active waypoint information reflectsthose changes. Because the unit does not rely on theLORAN signal for navigation, it can reference a differentGRI chain and/or secondary stations and still navigate tothe location stored in memory.To adjust the Loran TD settings, select Loran TD as thePosition Format to open the Loran TD setup window. Tochange the settings of any fields, highlight the field, andpress the Thumb Stick In. When done, highlight Saveand press In.For more information on Loran TDs, you may downloadGarmin’s Loran TD Position Format Handbook fromthe Garmin Web site at http://www.garmin.com/support/userManual.jsp.