26ReferenceMap PageProgramming the Data FieldsSelect ‘Show... Data Fields’ to view four optional Data Fields on the right side of the screenthat can be programmed to provide a variety of travel and navigation information. A list of thechoices is shown below. Not all data types are available on every page.To program a data field:1. Use the THUMB STICK to highlight the data field and then press IN to display the list ofdata options.2. Highlight the desired option and then press the THUMB STICK IN to change the data fieldtype.Data Field OptionsThee data field options apply to the Map Page data fields and the Trip Computer data fields.For definitions of these all data fields used in the Rino 130, refer to the Appendix.Changing Data Fields.BearingCourseCurrent DestinationCurrent DistanceCurrent ETACurrent ETEElevationFinal DestinationFinal DistanceFinal ETAFinal ETEGPS AccuracyHeadingMaximum SpeedMoving Avg. SpeedOdometerOff CourseOverall Avg. SpeedPointerSpeedSunriseSunsetTime of DayTo CourseTrip OdometerTrip Time - MovingTrip Time - StoppedTrip Time - TotalTurnVelocity Made GoodVertical SpeedTrip Computer Only:Location (lat/lon)Location (selected)
