Garmin G1000 Cockpit Reference Guide for the Socata TBM 850 190-00708-02 Rev. A42hazard AvoidanceFlightInstrumentsEASNav/Com/XPDR/AudioAFCSGPS NavFlightPlanningProceduresHazardAvoidanceAdditionalFeaturesAbnormalOperationAnnun/AlertsAppendixIndex3) Turn the small FMS Knob to display the ‘Cell/Strike’ window.4) Turn either FMS Knob to select ‘Cell’ or ‘Strike’. Press the ENT Key.5) Push the Fms Knob to return to the Navigation Map Page.Clear Stormscope Lightning Data from the Navigation Map Page1) Press the MENU Key (with the Navigation Map Page displayed).2) Turn either FMS Knob to highlight the ‘Clear Stormscope® Lightning’ fieldand press the ENT Key.NOTE:If heading input is lost, strikes and/or cells must be cleared manuallyafter the execution of each turn. This is to ensure that the strike and/or cellpositions are depicted accurately in relation to the nose of the aircraft.stormscope page1) Turn the large FMS Knob until the Map Page group is selected.2) Turn the small FMS Knob until the Stormscope Page is selected.Change the Stormscope Lightning Mode Between ‘Cell’ and ‘Strike’1) Select the Stormscope Page.2) Press the MODE Softkey. The CELL and STRIKE Softkeys are displayed.Press the CELL Softkey to display ‘CELL’ data or press the STRIKE Softkeyto display ‘STRIKE’ data. ‘CELL’ or ‘STRIKE’ is displayed in the mode boxlocated in the upper left corner of the Stormscope Page.NOTE: “Cell mode” uses a clustering program to identify clusters of electricalactivity that indicate cells.Change the Viewing Mode Between 360˚ and 120˚1) Select the Stormscope Page.2) Press the VIEW Softkey. The 360 and ARC Softkeys are displayed. Pressthe 360 Softkey to display a 360˚ viewing area or press the ARC Softkey todisplay a 120˚ viewing area.Press the CLEAR Softkey to remove all Stormscope lightning data from thedisplay.
