Garmin G1000 Cockpit Reference Guide for the Socata TBM 850190-00708-02 Rev. A 53hazard AvoidanceFlightInstruments EASNav/Com/XPDR/Audio AFCS GPS NavFlightPlanning ProceduresHazardAvoidanceAdditionalFeaturesAbnormalOperationAnnun/Alerts Appendix Indexsector scan1) While in the Horizontal Scan Mode, move the Joystick right or left to placethe Bearing Line in the desired position. The location of the Bearing Linewill become the center point of the Sector Scan.2) Press the FMS Knob to display the cursor.3) Turn the large FMS Knob to place the cursor in the SECTOR SCAN field.4) Turn the small FMS Knob to select FULL, 60˚, 40˚, or 20˚ scan.5) If desired, readjust the Bearing Line with the Joystick to change the centerof the Sector Scan.6) Press the FMS Knob to remove the cursor.Antenna stabilization1) To activate or deactivate the antenna stabilization, select the MODESoftkey.2) Select the STAB ON Softkey to activate antenna stabilization or selectthe STAB OFF Softkey to deactivate. The current stabilization condition isshown in the upper right of the weather radar display.Weather Attenuated Color highlight (WAtCh®)To activate or deactivate the WATch® feature, select the WATCH Softkey. Thisfeature is only available in the Horizontal Scan Mode.Weather AlertTo activate or deactivate Weather Alert, select the WX ALRT Softkey. Activatingand deactivating will also enable or inhibit the alert on the PFD.Automatic standbyWhen the weather radar system is in the Weather or Ground Map Mode, uponlanding the system will automatically switch to Standby Mode.
