Garmin StreetPilot 2610 Operating Instructions Manual

Also see for STREETPILOT 2610: Owner's manual Features Features

Garmin StreetPilot 2610 Operating Instructions Manual Manual pdf 14 page image

Introduction2Remote UsageAlphanumeric Remote Control UsageThe StreetPilot 2610/2650’s alphanumeric remote control allows you to perform functions similar to theunit’s touch screen and keypad controls. The key’s primary function appears on the key and the secondaryfunctions (same as keys on unit) for the PAGE, MENU, FIND, and SPEAK can be activated by holding thekey for more than 2 seconds (then release).In order for the remote to operate properly, be sure to point the IR (infrared) window on the remotetowards the unobstructed IR window on the left front of the StreetPilot 2610/2650.The remote also has additional function keys that allow you to quickly enter data and perform otheroperations on the unit:(ZOOM) IN Key — Zooms in to adjust the Map page scale to show a smaller area with more detail.(ZOOM) OUT Key — Zooms out to adjust the Map page scale to show a larger area with less detail.QUIT Key — Returns display to previous page. When entering data, pressing QUIT restores the previousvalue (cancels data entry.)ROUTE Key— Displays a pop-up window of available route navigation features.THUMB STICK — Selects menu options, changes settings, and enters data. Also controls movement if thepanning cursor on the Map page. Press IN on the THUMB STICK to select/activate a highlighted item orbegin data entry.ALPHANUMERIC KEYS — Used when entering alphanumeric data in the unit, such as an address orwaypoint name. These keys can be used in conjunction with the THUMB STICK. To select the first letterpress the key once, to select the second letter press the key twice, to select the third letter press the keythree times, or to select the number press the key four times (five times for 7 and 9). (The 1 key onlyaccepts one press and SPACE/0 key only accepts two key presses.) When you have the correct letter ornumber selected, pause and the unit advances the cursor to the next character automatically.The remote requires two AA alkaline batteries. To install the batteries, press UP on the battery door clip, then pull thebattery door away from the remote. Install batteries observing the correct polarity (see inside battery compartment).Replace cover, making sure the it is closed all the way.QUIT PAGEFIND MENUIN OUTROUTE SPEAK1 ABC2 DEF3GHI4JKL5MNO6PQRS7TUV8WXYZ90ZOOMIR Window