48ReferenceFinding an AddressEditing a NumberFinding an Address (within a MetroGuide map data coverage area )The procedure for finding Addresses and Intersections is a little different than PersonalWaypoints, Cities, or Points of Interest. To find an address, you enter a Number and a Street.Optionally, you can also enter a City to narrow down the search a little bit. If you have searched for anaddress before, the information you used to search may be filled in on this page.To find an Address:1. Press the FIND key, highlight Addresses, then press the ENTER key.2. If necessary, press the ENTER key to edit the Number.3. Use UP and DOWN areas of the ROCKER keypad to select the first digit of the desired Number.4. Press the RIGHT area of the ROCKER keypad to move to the next digit of the Number, andrepeat step 3 as necessary (top left picture).5. Press the ENTER key once the desired Number is shown.6. Press the DOWN area of the ROCKER keypad to highlight the Street and if necessary, press theENTER key to edit it. The screen changes to display the ‘Select Street Name’ page (bottom leftpicture).7. Use UP and DOWN areas of the ROCKER keypad to select the first letter or number of thedesired Street.8. Press the RIGHT area of the ROCKER keypad to move to the next digit of the Street, and repeatstep 7 as necessary.Entering the Street Name