Garmin VIEO RV 850 Series Owner's Manual

Also see for VIEO RV 1050 Series: Owner's manual

Audio SettingsSelect > > > .NOTE: when an option button is filled, the option is on. When the option button is clear, the option is off.Zone: enables you to configure the speaker zones (Speaker Zone Settings, page 50).Tuner Region: sets the region used by the various radio sources.Device Name: sets a name for this stereo.Searching: enables Fusion Alpha Search Technology (FAST), which allows you to quickly search for tracks byletter or number. You can set the minimum number of tracks required to enable the FAST menu. FASTsearching is available when your device contains more than this minimum number of tracks.AirPlay Password: sets a password that a user must enter when connecting to the stereo using the AirPlayfeature.Source: sets options for audio sources available on the stereo dock. You can enable or disable sources, renamesources or set which sources the device can stream over the Fusion PartyBus network (Source Settings,page 51).Network: enables you to configure the network settings (Network Configuration, page 51).Display: sets the Music app to display day or night colours. You can select Auto to allow the device toautomatically set day or night colours based on the time of day.About: shows the software version information for the stereo.Speaker Zone SettingsSetting a Zone NameYou can set a name for a speaker zone to make it easier to identify.1 Select > > > > Zone.2 Select a zone.3 Select Zone Name.4 Use the on-screen keyboard to enter a name, and select .Linking ZonesYou can link zones 1 and 2 to keep the volume levels synchronised. Adjusting the volume of either of the linkedzones affects both zones.Select > > > > Zone > Zone 2 > Link to Zone 1.When zones 1 and 2 are linked, appears on zones 1 and 2 on the volume screen.NOTE: after zones 1 and 2 are linked, you cannot adjust the volume of each zone individually.Enabling Volume Control of Zone 3 or 4 from a Connected AmplifierBy default the volume of zones 3 and 4 are controlled by the stereo. You can control the volume of these zonesusing the connected amplifier instead.1 Select > > > > Zone.2 Select zone 3 or zone 4.3 Select Volume Control to clear the check box.The audio signal from the zone is provided to the amplifier as a fixed-line-level output.Disabling a ZoneYou can disable an unused zone and remove it from the audio level pages. When a zone is disabled, you cannotchange any of the settings for that zone. You can disable zones 2, 3 and 4 only.1 Select > > > > Zone.2 Select a zone.3 Select Zone Enabled to clear the tick box.50 Music Playback and Stereo Features