Updating Maps and Software Using a Wi‑Fi NetworkNOTICEMap and software updates may require the device to download large files. Regular data limits or charges fromyour internet service provider apply. Contact your internet service provider for more information about datalimits or charges.You can update the maps and software by connecting your device to a Wi‑Fi network that provides access tothe internet. This allows you to keep your device up to date without connecting it to a computer. Verify yourvehicle is parked in a safe location and consistent power is supplied to the device during the update process.1 Connect the device to a Wi‑Fi network (Connecting to a Wireless Network, page 61).While connected to a Wi‑Fi network, the device checks for available updates automatically and displays anotification when an update is available.2 Select an option:• When an update notification appears, swipe down from the top of the screen, and select An update isavailable..• To manually check for updates, select > > System updates.The device displays available map and software updates. When an update is available, Update Availableappears below Map or Software.3 Select an option:• To install all available updates, select Download.• To install only map updates, select Map.• To install only software updates, select Software.4 Read the licence agreements, and select Accept All to accept the agreements.NOTE: if you do not agree with the licence terms, you can select Reject. This stops the update process. Youcannot install updates until you accept the licence agreements.5 Verify your vehicle is parked in a safe location and consistent power is supplied to the device and selectContinue.6 Keep the device connected to power and within range of the Wi‑Fi network until the update process iscomplete.TIP: if a map update is interrupted or cancelled before it completes, your device may be missing map data. Torepair missing map data, you must update the maps again.66 Device maintenance