Garmin Vector Owner's Manual

Also see for Vector: Quick start manual Quick start manual

Contents

2 Hold MENU.3 Select Settings > Bike Settings.4 Select a bike.5 Select Bike Details > More > Crank Length > Manual.6 Enter the crank length.Performing a Static Zero CalibrationNOTE: During this task, the bike must be in an upright position,and nothing can be touching the pedals.1 Hold MENU.2 Select Settings > Bike Settings.3 Select a bike.4 Select ANT + Power > Calibrate.When the zero reference is determined, a message appearson the Edge device.Customizing the Data FieldsThis procedure contains instructions for the Edge 500 device.1 Hold MENU.2 Select Settings > Bike Settings > Data Fields.3 Select a page.4 Select the number of data fields to appear on the page.5 Select a data field.Power Data FieldsNOTE: This list contains power data fields for the Edge 810 and510 devices. If you have another compatible device, see yourdevice owner's manual.Balance: The current left/right power balance.Balance - 10s Avg.: The 10-second moving average of the left/right power balance.Balance - 30s Avg.: The 30-second moving average of the left/right power balance.Balance - 3s Avg.: The three-second moving average of theleft/right power balance.Balance - Avg.: The average left/right power balance for thecurrent activity.Balance - Lap: The average left/right power balance for thecurrent lap.Cadence: The revolutions of the crank arm or strides perminute. Your device must be connected to a cadenceaccessory.Cadence - Avg.: The average cadence for the current activity.Cadence - Lap: The average cadence for the current lap.Power: The current power output in watts.Power - %FTP: The current power output as a percentage offunctional threshold power.Power - 10s Avg.: The 10-second moving average of poweroutput.Power - 30s Avg.: The 30-second moving average of poweroutput.Power - 3s Avg.: The three-second moving average of poweroutput.Power - Avg.: The average power output for the current activity.Power - IF: The Intensity Factor™ for the current activity.Power - kj: The accumulated work performed (power output) inkilojoules.Power - Lap: The average power output for the current lap.Power - Last Lap: The average power output for the lastcompleted lap.Power - Max.: The top power output for the current activity.Power - NP: The Normalized Power™ for the current activity.Power - NP Lap: The average Normalized Power for thecurrent lap.Power - NP Last Lap: The average Normalized Power for thelast completed lap.Power - TSS: The Training Stress Score™ for the currentactivity.Power - Watts/kg: The amount of power output in watts perkilogram.Power Zone: The current range of power output (1 to 7) basedon your FTP or custom settings.TroubleshootingUpdating the Software Using Vector UpdaterBefore you can run the Vector Updater application, you musthave a USB ANT Stick (included), an internet connection, andthe pedal pods must have functioning batteries installed.1 Go to www.garmin.com/vectorowner, and download theVector Updater application.2 Bring Vector within range (3 m) of your computer.3 Open the Vector Updater application, and follow the on-screen instructions.Tips for Using Vector UpdaterIf Vector Updater is not functioning properly, you can try thesetips.• Insert the USB ANT Stick directly into a USB port on yourcomputer. USB hubs are not recommended.• If you are also running the ANT Agent™ application on yourcomputer, you can either insert another USB ANT Stick orclose the ANT Agent application.• If Vector Updater cannot find your device after more than twominutes, remove the batteries from each pedal pod, wait 20seconds, and replace the batteries.If Vector Updater still cannot find your device, you shouldinstall new batteries into each pedal pod.Third-Party DevicesFor a list of devices that are compatible with Vector, go towww.garmin.com/vectorowner.6 Appendix

/ 12

Related manuals for Garmin Vector