22 zūmo 665 Owner’s ManualUsing Hands‑free CallingPairing the zūmo with YourMobile Phone1. Enable the Bluetooth setting on yourzūmo. Touch Tools > Settings >Bluetooth.2. Select Enabled.3. Under Phone, touch add (or Change).4. Enable the Bluetooth component on yourphone. Enable Find Me/Discoverable/Visible mode. These settings might be ina menu called Bluetooth, Connections, orHands‑free.5. Touch OK on the zūmo.6. Select your phone, and touch OK.7. Enter 1234 into your phone.receiving a CallWhen you receive a call, the Incoming Callwindow appears. Touch Answer to answerthe call. Touch Ignore to ignore the call andsilence the ring.The internal microphone is in the front of thezūmo.During a CallTo end a call, touch > End Call. Touch> Call Options for the following options:Touch Tones—displays a keypad page soyou can use automated systems, such asvoice mail.Transfer Audio To Phone—this ishelpful if you want to turn off the zūmobut stay on the call, or if you needprivacy. To switch back, touch TransferAudio To Device.Mute Microphone.•••Using the Phone MenuFrom the Menu page, touch Phone to viewthe Phone menu. Touch Status to view thesignal strength, the battery level, and thename of the connected phone.NOTE: Not all phones support all featuresof the zūmo Phone menu.Using Your Phone BookEach time your mobile phone connects withthe zūmo, the phone book is automaticallyloaded into the zūmo. It may take a fewminutes for the phone book to be available.1. Touch Phone > Phone Book.2. Touch the phone book entry (contact) youwant to call.3. Touch Dial to call the contact.