Garmin ZUMO XT2 Owner's Manual

Device CareNOTICEAvoid dropping your device.Do not store the device where prolonged exposure to extreme temperatures can occur, as it can causepermanent damage.Never use a hard or sharp object to operate the touchscreen as this may result in damage.Cleaning the outer casingNOTICEAvoid chemical cleaners and solvents that can damage plastic components.1 Clean the outer casing of the device (not the touchscreen) using a cloth dampened with a mild detergentsolution.2 Wipe the device dry.Cleaning the Touchscreen1 Use a soft, clean, lint-free cloth.2 If necessary, lightly dampen the cloth with water.3 If using a dampened cloth, turn off the device and disconnect the device from the power.4 Gently wipe the screen with the cloth.Restarting the DeviceYou can restart your device if it stops functioning.Hold the power button for 12 seconds.Removing the Device, Mount and Suction CupRemoving the Device from the Mount1 Press the release tab or button on the mount.2 Tilt the top of the device downwards and lift the device from the mount.Removing the Mount from the Suction Cup1 Turn the device mount to the right or left.2 Apply pressure until the socket on the mount releases the ball on the suction cup.Removing the Suction Cup from the Windscreen1 Flip the lever on the suction cup towards you.2 Pull the tab on the suction cup towards you.Changing the Fuse in the Fuse CableNOTICEWhen replacing the fuse, verify that the replacement fuse is fully inserted into the fuse housing. The vehiclepower cable does not work unless it is assembled correctly.If your device does not charge in your vehicle, you may need to replace the fuse located on the red systempower cable.1 Lift up the cover from the top of the fuse housing.2 Insert a new 3 A fuse.3 Replace the cover on the fuse housing.52 Device maintenance