Garmin ZUMO XT2 Owner's Manual

Installing a memory card for maps and dataYou can install a memory card to increase the storage space for maps and other data on your device. You canpurchase memory cards from an electronics supplier. The device supports microSD memory cards from 4 to256 GB. Memory cards must use the FAT32 file system format.1 Locate the map and data memory card slot on your device (Device Overview, page 1).2 Insert a memory card into the slot.3 Press it in until it clicks.Data managementThe device has a memory card slot for additional data storage.NOTE: the device is compatible with Windows 7 and newer, and Mac®OS 10.7 and newer.About Memory CardsYou can purchase memory cards from an electronics supplier or purchase pre-loaded Garmin mapping software(www.garmin.com). Memory cards can be used to store files such as maps and POIs.Connecting the Device to Your ComputerYou can connect the device to your computer using a USB cable.1 Plug the small end of the USB cable into the port on the device.2 Plug the larger end of the USB cable into a port on your computer.3 From your zūmo device, select Tap to Connect to Computer.A picture of your device connected to a computer appears on the device screen.Depending on your computer operating system, the device appears as either a portable device, a removabledrive, or a removable volume.Transferring GPX Files From Your ComputerApple®computers may require additional third-party software, such as Android File Transfer, to read and writefiles on this device.If you have already created routes that you want to use on your device, you can transfer GPX files directly fromyour computer.1 Connect the device to your computer (Connecting the Device to Your Computer, page 62).The device appears as a portable device.2 On your computer, open the file browser.3 Select a GPX file.4 Select Edit > Copy.5 Browse to the GPX folder on the device.6 Select Edit > Paste.Transferring data from your computer1 Connect the device to your computer (Connecting the Device to Your Computer, page 62).Depending on your computer operating system, the device appears as either a portable device, a removabledrive, or a removable volume.2 On your computer, open the file browser.3 Select a file.4 Select Edit > Copy.5 Browse to a folder on the device.NOTE: for a removable drive or volume, you should not place files in the Garmin folder.6 Select Edit > Paste.62 Appendix