33Setup PageTime ZoneThe Time Zone field can be set to any one of eight pre-programmed zones. To change thetime zone, follow the steps given on page 6.UTC OffsetYou can use the UTC Offset field to manually set the eTrex to match any time zone inthe world. To access the UTC Offset field, select ‘OTHER’ for the time zone, then enter thedesired time offset from UTC time.Daylight Savings TimeDaylight savings time can be set to ‘Automatic’ (using the built-in almanac to automati-cally change the clock settings when daylight savings goes into or out of effect). You canchoose ‘Yes’ to manually add daylight savings or ‘No’ to remain on standard time.To change the daylight savings field:1. Press the PAGE button and switch to the MENU Page. Press the UP or DOWN button tohighlight ‘SETUP.’ Press ENTER. The ‘SETUP’ Page appears.2. Press the UP or DOWN button to highlight ‘TIME,’ then press ENTER.3. Press the UP or DOWN button to highlight ‘DAYLIGHT SAVINGS,’ then press ENTER.4. Press the UP or DOWN button to select ‘AUTO,’ ‘YES,’ or ‘NO,’ then press ENTER. PressPAGE to get back to the page of your choice.NOTE: The daylight savings time setting does not affect the UTC offset number.UTC stands for ‘Universal Time Coordinate’ andreplaced Greenwich Mean Time (GMT) as the Worldstandard for time in 1986. It is based on atomic mea-surements rather than the earth's rotation.The eTrex can automatically select theDaylight Savings Time mode.Time Page