eTrex Venture Cx and Legend Cx Owner’s Manual 13BASIC OPERATION > C REATING AND USING WAYPOINTSTo move a waypoint on the Map Page:1. On the Find Menu, highlight the Waypointsicon, and press Enter to open the WaypointsPage.2. Select the waypoint you want to move, andpress Enter. The Waypoint Page opens.3. Highlight the Map button, and press Enter toshow the waypoint on the map.4. Press Enter again to place a MOVE markernext to the waypoint.5. Use the Rocker to move the waypoint to anew location on the map, and press Enter.Averaging the Waypoint’s LocationYou can average a new waypoint location over time toproduce a more accurate location.NOTE: You must have a GPS satellite fixbefore you can average a waypoint’s location.You cannot average a waypoint after it hasbeen saved to the waypoints list and the MarkWaypoint page is closed as there is no longersatellite fix for that specific location.To calculate the average location:1. Press the Find key to open the Find Menu.2. Highlight the Waypoints icon, and press Enterto open the Mark Waypoint Page.3. Select the waypoint for which you want tocalculate the average location, and pressEnter.4. Press the Menu key to open the OptionsMenu.5. Highlight Average Location, and press Enterto open the Average Location Page. The unitbegins calculating the average location of thewaypoint.OriginallocationNew locationMoving a waypoint