30 eTrex Venture Cx and Legend Cx Owner’s ManualBASIC OPERATION > U SING TRACKS3. Press Enter to start the area calculation.As you begin to move and define the area’sboundaries, a Stop button appears at thebottom of the page.4. When finished defining the area, press Enterto open the page with a Save button.5. Press Enter to save the new track to theSaved Tracks list on the Tracks Page.Navigating a Saved TrackYou can save your track log to use later as aTracBack. When initiated, a TracBack route takes youback to the oldest stored track log point.To use the TracBack feature:1. With the Saved Tracks Page for the track orthe Track Log open, highlight the TracBackbutton, and press Enter to open the TracBackPage showing the track. You can select thepoint you want to TracBack to.2. Use the Rocker to move the pointer to thepoint on the map, and press Enter to startnavigating the TracBack.3. Select either Follow Road to route back tothe selected point using available roadways,or select Follow Track to retrace your originalpath of travel. Highlight the Don’t Ask Againoption, and press Enter if you want to use thesame option each time you use TracBack.The Map Page opens with directions to thefirst turn on the track at the top of the page.4. Move in the direction of the first turn. Whenyou reach the first turn, directions to each turnis shown, until you reach your destination.5. To exit, press Menu, and select Stop Navigation.Start calculation Save calculated track