31The AltimeterPageReferenceReset - OverviewYou can reset the elevation data and the maximumelevation data by selecting the ‘Reset’ option from the pageOptions Menu.Step-by-Step InstructionsTo reset the elevation data and max elevation fields:1. Use the CLICK STICK to highlight the ‘Reset’ option fromthe page Options Menu and press in on the CLICK STICKto display the “Reset’ page.2. Use the CLICK STICK to highlight the reset options on thepage and then press in on the CLICK STICK to place acheck mark in the box next to a selected item.3. Move to the ‘Apply’ button and press in on the CLICKSTICK to reset the data fi elds for the selected items.Data Field - OverviewThe two user-selectable data fields support this page andcan be programmed to display the following data options:Average Ascent - The avg. vertical distance of ascents.Average Descent - The avg. vertical distance of descents.Maximum Ascent - The maximum ascent rate in feetper minute.Maxium Descent - The maximum descent rate in feetper minute.Maximum Elevation - The highest elevation reached.Minimum Elevation - The lowest elevation reached.Ambient Pressure - The uncalibrated current pressure.Normalized Pressure - The calibrated current pressure.Total Ascent - The total distance ascended.Total Descent - The total distance descended.Vertical Speed - The rate of altitude gain/loss over time.Step-by-Step InstructionsTo program a data field:1. Use the CLICK STICK to highlight the desired data fi eldand then press it in to open the data field options menu.2. Use the CLICK STICK to move Up or Down themenu to highlight a desired data option and then press into place it in the data fi eld.Reset Options MenuUseful for clearing olddata.IMPORTANT!Use care when selectingDELETE options as thiswill remove all savedTracks, Waypoints, andRoutes from the unitmemory.Navigation Page‘Big Numbers’ Option