Garmin iQue M3 Quick Reference Manual

Also see for iQue M3 - Win Mobile: Operating instructions Declaration of conformity

Contents

iQue M3 Quick Reference Guide 17Mount the iQue M3Adjusting knobs Suction leverSuctioncupPivoting joint rotates to the left or rightCradleTo install the suction mount:1. Loosen the adjusting knobs (shown above). Thenextend the mount and retighten the knobs.2. Clean and dry the windshield and the suction cupwith rubbing alcohol.3. Make sure the suction lever is up (pulled away fromthe suction cup). Position the suction mount on yourwindshield. Press the suction cup firmly against theglass and rock it to remove as much air as possible.4. Press the suction lever down toward the windshield.5. Gently slide the iQue M3 down into the cradle until itclicks into place.6. Loosen the adjustment knobs and re-position themount, if necessary. Then tighten the knobs firmly.To remove the suction mount from the windshield, pull thesuction lever up away from the windshield. If necessary,pull the tab on the bottom of the suction cup toward you.Contact GarminIf you encounter any difficulty while using your iQueM3, or if you have any questions, in the U.S.A. contactGarmin Product Support at 913/397.8200 or 800/800.1020,Monday–Friday, 8 AM–5 PM Central Time; or by e-mail atsupport@garmin.com. In Europe, contact Garmin (Europe)Ltd. at 44/0870.8501241.

/ 20

Related manuals for Garmin iQue M3 - Win Mobile