Garmin nuviCam Owner's Manual

Also see for camper 660: Owner's manual Quick start manual

Garmin nuviCam Owner's Manual Manual pdf 6 page image

Battery statusConnected to Smartphone LinkTemperatureUnread myGarmin™ messagesDash camera recording statusUsing the On-Screen Buttons• Select to return to the previous menu screen.• Hold to quickly return to the main menu.• Select or to see more choices.• Hold or to scroll faster.• Select to see a menu of options for the current screen.Entering and Exiting Sleep ModeYou can use sleep mode to conserve battery power when yourdevice is not in use. While in sleep mode, your device uses verylittle power and can wake instantly for use.TIP: You can charge your device faster by putting it in sleepmode while charging the battery.Press the power key À.Turning Off the Device1 Hold the power key until a prompt appears on the screen.The prompt appears after five seconds. If you release thepower key before the prompt appears, the device enterssleep mode.2 Select Off.Adjusting the Volume1 Select Volume.2 Select an option:• Use the slider bar to adjust the volume.• Select to mute the device.• Select for additional options.Enabling Automatic VolumeYour device can increase or decrease the volume automaticallybased on the level of background noise.1 Select Volume > .2 Select Automatic Volume.Adjusting the Screen Brightness1 Select Settings > Display > Brightness.2 Use the slider bar to adjust the brightness.Dash CameraAligning the CameraWARNINGDo not attempt to align the camera while driving.You should align the dash camera each time you mount the orreposition the device. The advanced driver assistance featuresmay not perform properly if the camera is not aligned.1 Select Settings > Camera > > Alignment.2 Tilt the device and rotate the camera to align the camera.The crosshairs should point straight ahead, and the horizonline should be centered between the top and bottom of thescreen.Dash Camera RecordingNOTICELegal RestrictionsIn some jurisdictions it could be considered an invasion ofprivacy rights to take or publicly display photographs or videosof people or their vehicles using this product. It is yourresponsibility to know and comply with applicable laws andrights to privacy in your jurisdiction.Before you can record video using the integrated dash camera,you must install a camera memory card (Installing the DashCamera Memory Card).By default, the device immediately starts recording video when itturns on. It continues recording, overwriting the oldest, non-saved video until it turns off. While recording, the LED is solidred.The device records continuously until the device is turned off orvideo recording is disabled.Saving a Video RecordingBy default, the device uses a sensor to detect possibleaccidental collisions and saves video footage before, during,and after the detected event.You can also manually save video at any time.1 While recording, select the camera key À.The device saves a photo and the video footage before,during, and after you select the key. The LED flashes redwhile the device is saving video footage.2 Select the camera key again to extend the saved recordingtime (optional).A message indicates the amount of video footage to besaved.The memory card has limited storage. After you save a videorecording, you should transfer the recording to your computer orother external storage location for permanent storage.Taking a PhotoYou can take still photographs with this device. By default, thedevice stores time and location information with the photo.Select Apps > Dash Cam > .The device takes a photo and saves it to the memory card.Starting and Stopping Dash Camera Recording1 Select Apps > Dash Cam.2 Select an option:• To stop recording, select .The LED is solid green while recording is stopped.TIP: By default, recording starts automatically the nexttime you turn on the device. You can disable this option inthe camera settings (Camera Settings).2 Dash Camera