Garmin striker 4 Owner's Manual

Also see for striker 4: Quick start guide User manual Installation instructions

Contents

Garmin striker 4 Owner's Manual Manual pdf 8 page image

A magenta line appears. In the center of the magenta line isa thinner purple line that represents the corrected coursefrom your present location to the destination. The correctedcourse is dynamic, and it moves with your boat when you areoff course.5 Review the course indicated by the magenta line.6 Follow the magenta line along each leg in the route, steeringto avoid land, shallow water, and other obstacles.7 If you are off course, follow the purple line (corrected course)to go to your destination, or steer back to the magenta line(direct course).Deleting a Saved Route1 Select User Data > Routes.2 Select a route.3 Select Delete.Deleting All Saved RoutesSelect User Data > Manage Data > Clear User Data >Routes.TrackA track is a recording of the current path of your boat. You canshow your current track in waypoint map view.Setting the Color of the Track1 Select User Data > Track > Track Options > Track Color.2 Select a track color.Clearing the TrackSelect User Data > Track > Clear Track > OK.Managing the Track Log Memory DuringRecording1 Select User Data > Track > Track Options.2 Select Record Mode.3 Select an option:• To record a track log until the track memory is full, selectFill.• To continuously record a track log, replacing the oldesttrack data with new data, select Wrap.Configuring the Recording Interval of theTrack LogYou can indicate the frequency at which the track plot isrecorded. Recording more frequent plots is more accurate butfills the track log faster. The resolution interval is recommendedfor the most efficient use of memory.1 Select User Data > Track > Track Options > RecordIntervals > Interval.2 Select an option:• To record the track based on a distance between points,select Distance > Change, and enter the distance.• To record the track based on a time interval, select Time >Change, and enter the time interval.• To record the track plot based on a variance from yourcourse, select Resolution > Change, and enter themaximum error allowed from the true course beforerecording a track point.Deleting All Saved Waypoints, Routes, andTracksSelect User Data > Manage Data > Clear User Data > All >OK.Device ConfigurationSystem SettingsSelect Settings > System.Display: Adjusts the backlight brightness (Adjusting theBacklight, page 1) and color scheme (Adjusting the ColorMode, page 1).GPS: Provides information about the GPS satellite settings andfix.Language: Sets the on-screen language.Simulator: Turns on the simulator and allows you to set thespeed and simulated location.Beeper: Turns on and off the tone that sounds for alarms andselections (Setting the Beeper, page 1).Auto Power: Turns on the device automatically when power isapplied.System Information: Provides information about the device andthe software version.System InformationSelect Settings > Settings > System Information.Event Log: Allows you to view a log of system events.Software Information: Provides information about the deviceand the software version.Garmin Devices: Provides information about connected Garmindevices.Factory Settings: Restores the device to factory settings.NOTE: This deletes any setting information you haveentered.My Vessel SettingsNOTE: Some settings and options require additional hardware.Select Settings > My Vessel.Transducer Type: Displays the type of transducer connected tothe device (Selecting the Transducer Type, page 1).Keel Offset: Offsets the surface reading for the depth of a keel,making it possible to measure depth from the bottom of thekeel instead of from the transducer location (Setting the KeelOffset, page 7).Temp. Offset: Compensates for the water temperature readingfrom a temperature-capable transducer (Setting the WaterTemperature Offset, page 8).Setting the Keel OffsetYou can enter a keel offset to compensate the surface readingfor the depth of a keel, making it possible to measure waterdepth or depth below the keel instead of depth below thetransducer. Enter a positive number to offset for a keel. You canenter a negative number to compensate for a large vessel thatmay draw several feet of water.1 Complete an action, based on the location of the transducer:• If the transducer is installed at the water line À, measurethe distance from the transducer location to the keel of theboat. Enter this value in steps 3 and 4 as a positivenumber to display depth below keel.• If the transducer is installed at the bottom of the keel Á,measure the distance from the transducer to the waterline. Enter this value in steps 3 and 4 as a negativeTrack 7

/ 10

Related manuals for Garmin striker 4