USE AND MAINTENANCE ENGLISH45cod. G195025631.7 WARNING SIGNSThe signs described in Fig. 4 are reproduced on the machine.keep them clean and replace them if they should come off orbecome illegible. Carefully read each description and learn theirmeanings by heart.2.1.1 WARNING SIGNALS1) Before operating, carefully read the instruction booklet.2) Before carrying out maintenance, stop the machine andconsult the instruction booklet.2.1.2 DANGER SIGNALS3 Risk of inhaling harmful sub- stances. Wear a dust mask4) Danger of getting squashed during opening. Keep at a safedistance from the machine.5) Danger of getting hooked by the Cardan shaft. Keep awayfrom moving parts.6) Danger of getting trapped. Keep away from moving parts.7) Danger of getting squashed during closure. Keep at a safedistance from the machine.8) When using anticryptogamic chemicals, use adequateprotection.9) High noise level. Use adequate acoustic protection.10) Pipes with high pressure fluids. Take care if flexible pipesbreak as oil could spurt. Read the instruction manual.11) Before engaging the pto, check that the rpm rate is thatprescribed. Never exchange the 540 rpm rate for 1000 rpm.2.1.3 INDICATOR SIGNALS12) Wear safety clothing.13) Signs the hooking points for lifting.14) Greasing point.275 1698151344101112314131477fig. 4