51note: Before inserting the temperature control probe into the probe socket, make sure thatthe interior of the probe socket is fully dry. To do this, shake out excess water, then wipe theinterior of the probe socket with a dry cloth.Assembling the wok base3. Lower the wok bowl over the base as illustrated in picture D. Press down on the quick re-lease knob and rotate clockwise to lock into place, as shown in picture E. Ensure the base islocked into position before rotating the wok right-side-up.sTOrAgeWArnIng: Young children must be supervised that they do not play with the appliance orany part of it. When the appliance is not in use, always switch off: turn the temperature controlprobe to setting 0. Thereafter, unplug the appliance from the power outlet, than unplug thetemperature control probe from the wok base. Do not leave the appliance unattended whileconnected to the power outlet to avoid risk of electric shock or fire.Always clean the appliance and all its parts before storing to avoid accumulation of dried-onfood (see: ›Care and cleaning‹).Ensure to store the appliance where it is clean, dry and safe from frost, direct sunlight andinadmissible strain (mechanical or electric shock, heat, moisture) and where it is out of reachof young children. Place the appliance on a clean and stable surface, where it cannot fall.Do not place any hard or heavy objects on the appliance or any part of it. Never place theappliance in an upright position. Do not place the grilling tops on one another toavoid damage to the non-stick coatings.Always handle the power cord and temperature control probe with special care. Electriccables may never be knotted, twisted, pulled, strained, or squeezed.Do not use any parts or accessories of the appliance for any other purpose than operatingthe appliance. It is good advice to store the parts and accessories of the appliance with theappliance.cAuTIOn: Do not hold the appliance by the power cord for moving the appliance. To movethe appliance, always grasp the housing at both sides to avoid damage.Store the temperature control probe carefully. Do not knock or drop it because the probe maybe damaged.note: For convenient storage of the temperature control probe, line the wok bowl with twosheets of paper towel and place the probe on the paper towels. This will ensure the probe andpower plug don‘t scratch the non-stick coating.nOTes FOr DIsPOsAlDispose of the appliance and packaging must be effected in accordance with thecorresponding local regulations and requirements for electrical appliances and pa-ckaging. Please contact your local disposal company.Do not dispose of electrical appliances as unsorted municipal waste, use separate collec-tion facilities. Contact your local government for information regarding the collection systemsavailable. If electrical appliances are disposed of in landfills or dumps, hazardous substances