Gastroback Design Mincer Plus Operating Instructions Manual

Also see for Design Mincer Plus: Operating instructions

Gastroback Design Mincer Plus Operating Instructions Manual Manual pdf 6 page image

30always use only one of the provided grinding discs. Do not process bones, nuts, frozenfoods or any other hard items.• Do not place the appliance or any part of it on or near hot surfaces (e.g. burner, heateror oven). Do not use any parts or tools of the appliance with any other device.• Do not attempt to grind bones, nuts or other hard items.• Do not grasp in the gear hole of the motor housing, with the appliance connected to thepower supply.• Do not leave the appliance unattended during operation. Always switch off (ON/OFF but-ton) at first, then unplug the appliance, and wait until the motor comes to a standstill, beforemoving, or cleaning, or assembling or disassembling any parts, or when the appliance isnot in use.• Do not press the reverse button before the motor has completely come to a standstill.• Always grasp the motor housing at both sides near the bottom for moving or lifting. Donot hold the appliance at the tray or cutter housing, for moving the appliance.• Do not use any abrasive cleaners, cleaning pads (e.g. metal scouring pads), or any corro-sive chemicals (e.g. bleach) for cleaning. Do not immerse the motor housing or power cordin water or any other liquid. Do not spill or drip any liquids on the motor housing, or on thepower cord to avoid risk of fire and electric shock. Do not pour any liquids in the feed tubewith the cutter housing connected to the motor housing! When liquids are spilled in the motorhousing, immediately unplug the appliance, switch off the appliance completely (ON/OFFbutton), and wait for the appliance to cool down. Thereafter, clean and dry the appliancethoroughly. (See: ›Care and Cleaning‹)• Do not place the appliance or any of its parts or tools in an automaticdishwasher.• Do not leave any food dry on the appliance. Always clean the appliance after each useto prevent a build-up of baked-on foods (see: ›Care and Cleaning‹). Always keep the appli-ance and the tools clean.Important safeguards for electrical appliancesThe appliance is driven electrically. Place the appliance near a suitable wall power socket toconnect the appliance directly to a protected mains power supply with protective conductor(earth/ground) connected properly. Ensure that the voltage rating of your mains power sup-ply corresponds to the voltage requirements of the appliance (220-240 V, 50/60 Hz, AC,rated for at least 8 A). The installation of a residual current operated circuit breaker (r.c.c.b.)with a maximum rated residual operating current of 30 mA in the supplying electrical circuitis strongly recommended. If in doubt, contact your electrician for further information.In various foreign countries, the specifications for power supplies are subject to incompatiblenorms. Therefore it is possible that power supplies in foreign countries do not meet the requi-rements for safe operation of the appliance. Thus, before operating the appliance abroad,ensure that safe operation is possible.• Do not to use any extension cords or multi socket outlets.• Always handle the power cord with care. Always completely unwind the power cordbefore use. Do not place the appliance on the power cord. The power cord may never beknotted, twisted, pulled, strained or squeezed. Do not let the plug or power cord hang over