20Remote Control User’s Guidewww.gateway.comSearching for component codesIf you cannot find your manufacturer in the component list or the programcode does not work, you can use the remote control to search for the correctcomponent code.To search for a component code:1 Turn on the component.2 Press the matching component button on the remote control.3 Press and hold SETUP until the LED flashes twice.4 Press 9 9 1. The LED flashes twice.5 Point the remote control at the component and alternate between pressingPOWER and the component button on the remote control until thecomponent turns off.If the component still does not respond, clear the component button, thenrepeat the search procedure.To clear the component button:1 Make sure that the component is turned on.2 Press and hold the SETUP button on the remote control until the LEDflashes twice.3 Press 9 9 2, then press the component button on the remote control twice.