Gecko Exodus MXR 1604DSP Owner's Manual
                   | |
38. AC ADAPTORFor GECKO® EXODUS MXR 1604DSP, use the included power adaptor. For GECKO® EXODUS MXR3204DSP, use the built-in power cord.WARNING: Be sure to verify your actual line voltage is the same as the voltage levelrequired by your mixing console. Connection to an inappropriate power source mayresult in fire or electric shock, and extensive damage which is not covered by thewarranty.MAKING CONNECTIONSMAKING CONNECTIONSThe GECKO® EXODUS MXR 1604DSP / MXR 3204DSP can be used for many professional applications inboth live and studio settings.For all connections, refer to the following steps:1. Before connecting to microphones and instruments, be sure that all devices are turned OFF. Also besure that all of the mixing console's channel faders and master control faders are set all the waydown.2. For each connection, connect one end of the cable to the relevant microphone or instrument andconnect the other end to the appropriate LINE or MIC connector on the mixing console. Where aninput channel provides both a MIC connector and a LINE connector, you may use either one of theseconnectors but you must not use both at the same time. Please connect to only one of theseconnectors on each channel.3. Make connections using quality audio cables (i.e. GECKO® TRUTH T3AL) and connectors (i.e.GECKO® OLYMPIAN connectors) according to your requirements.4. To avoid causing damage to speakers, power up the devices in the following order: Peripheraldevices → mixing console → power amplifiers (or powered speakers). When shutting the systemdown, turn OFF the power in the reverse order: Power amplifiers (powered speakers) → mixingconsole → peripheral devices.5. Although it requires no special ventilation, ambient temperatures should not exceed 113°F (45°C)when equipment is powered.MOUNTING YOUR MIXING CONSOLEMOUNTING YOUR MIXING CONSOLEFor mixing console mounting, refer to the following steps:1. Two metal rack-mount supports are screwed onto the unit. Use a screwdriver to remove thesesupports.2. Turn the supports over, and fasten them into place again using the same screws.3. Mount the unit into the rack, and fasten it into place.______________________________________________________________________________________1111© GECKO MUSIC GROUP. All Rights Reserved. |
Related manuals for Gecko Exodus MXR 1604DSP
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine