Gemini MM-4000 Operation Manual

Also see for MM-4000: Brochure & specs Operation manual

Contents

Gemini MM-4000 Operation Manual Manual pdf 6 page image

MM-4000FADER REPLACEMENT: SPECIFICATIONS:1. UNSCREW THE FADER (B) SCREWS. DO NOT TOUCH INSIDESCREWS (C) CAREFULLY REMOVE OLD CROSS FADER AND UNPLUGCABLE (D)2. PLUG IN THE NEW CROSSFADER INTO CABLE (D) ANDPLACE BACK INTO MIXER.3. SCREW THE CROSS FADER TOMIXER WITH THE FADER PLATESCREWS (B)4. REPLACE THE FACE OF THEMIXER AND SCREW THE FOURSCREWS BACK IN AND REPLACE THE FADER KNOBS.6INPUTS:Phono.....................................................................................3mV,47 KOhmLine..................................................................................150 mV, 27 KOhmMIC......................................................................1.5 mV, 1 KOhm BalancedOUTPUTS:Max...................................................................................20V Peak-to PeakRec.....................................................................................225 mV, 5 KOhmGENERAL:Frequency Response...............................................20Hz - 20KHz +/- 0.5dBDistortion..........................................................................................< 0.02%S/N Ratio...........................................................................Better than 85 dBHeadphone impedance.....................................................................32 OhmPower Source ..........................................................115/230v,50/60Hz,20wUnit Demensions........................................................................19” x 7” x 3”.......................................................................................(483 x 178 x76mm)Weight................................................................................10 lbs (4.53 kg)SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTIFICATION FOR IMPROVEMENT