Genie EDVR-4 User Manual

Also see for EDVR-16: User guide

Contents

Genie EDVR-4 User Manual Manual pdf 24 page image

23 DIGITAL VIDEO RECORDER4. ZoomingDuring live view mode or playback, it is possible to zoom into a section of the screen to get aclose-up view of the screen.1. To activate the digital zoom, select the full screen display of the camera you wish tozoom.2. Then press the [ZOOM] button on IR Remote controller. Zoom area box pops up, asshown below.3. Move the box to the desired position using Direction [ ] buttons.4. Press [+] button to enlarge the image. Press [ - ] button to zoom out the image.5. Press [CANCEL] button to return normal mode.If the Zoom button is pressed while in a multiscreen display, zoom operation is notactivated.4. Spot MonitorIn addition to the Main Monitor, attaching a Spot Monitor enables user to monitor specificchannels independently form the main monitory Press [Spot] button on the remote controller, then press number button you wish watch asfull screen.y Press [Spot] button twice to auto switch cameras. Sequence interval can be set from theSequential Setup.y When an alarm has been triggered, that specific channel will go into Full Screen.x 2 x 8