Genie EDVR-4 User Manual
Also see for EDVR-16: User guide
                                                                                                   | |
Contents
| 
52 DIGITAL VIDEO RECORDERThe layout of the PTZ interface conforms to the layout of the front of the DVR or the remotecontroller. Menu button is the guide anchor position for all other buttons. When in PTZinterface mode, all buttons used for the PTZ related operation.** Please Check below items before using PTZ Camera.1. RS 232/485 Connection, camera Jumper Setting and etc2. Set the PTZ Camera ID & MODEL NO at the Display menu2. Preset & TourButton FunctionSet preset position; SPOT OUT on remote controllerMove the PTZ into desired location.Press the Preset button.Custom 1 will illuminate.Set the # for the Preset location.Press Enter to save and exit.Go to preset position; INFO on remote controllerPress Go to button.Enter the desired Preset # and press Enter.Start Auto Tour; BACKUP on remote controllerPress Auto Tour Button.Press the + button and enter the range of Preset and press Enter.For Example, Auto Tour Button, +5 will start the tour of 1 ~ 5 presets of thePTZ Camera3. Custom FunctionsButton FunctionPTZ custom function 1; DISPLAY on remote controllerPTZ custom function 2; ZOOM on remote controllerPTZ custom function 3; P/T/Z on remote controllerPlease refer to the PTZ manufacture’s instruction manual for proper jumper settings to matchthe protocols to the DVR. |
Related manuals for Genie EDVR-16
manualsdatabase
Your AI-powered manual search engine