284-4. Setup – RECORD ModeIn the SETUP menu, select the RECORD tab and the RECORD menu appears, as pictured below.Navigate through the menu items using the mouse, or the buttons on the remote control, and change thevalue of the menu items.Figure 4.4.1. RECORD Setup ScreenTable 4.4.1. Menu Items in RECORD Setup ScreenMenu Item DescriptionCHANNEL Select a channel for applying the following settings using the mouse or the controlbutton on the remote control. To change the values of all channels, take thefollowing steps. Select the following to change the values of all channels.RECORDING Assign the recording mode for the selected channel. Options are:Continuous, Motion, Schedule or Disable.SENSORRECORDINGSelect the sensor setting for the selected channel.PRE RECORD Enable/disable pre-event recording. Pre-event recording time is up to 20 minutes.POST EVENTRECORDSet the post event recording time duration for the specified channel.(10~30 seconds)AUDIO Enable/disable audio recording for the specified channel.SCHEDULE Set the recording schedule.
