Genie EZPZ User Manual
                                                                                    | |
Contents
| 
414-10. Setup - CONFIG ModeIn the SETUP menu, select the CONFIG tab and the configuration menu appears, as pictured below.Navigate through the menu items using the mouse or the buttons on the remote control and change thevalue of the menu items.Figure 4.10.1. CONFIG Setup ScreenTable 4.10.1. CONFIG SetupItem DescriptionSAVE SETUPTO A USBUser can save the current configuration (Setting Values) of the EZPZ NVR toa USB flash drive. Plug in the USB flash on the front panel and press thebutton to start the saving process.LOAD SETUPFROM A USBUser can upload the configuration of the EZPZ NVR to another EZPZ NVRusing a USB Flash drive. Plug in the USB flash drive on the front panel andpress the button to start the loading process.LOADDEFAULTPress the button to reset the system to the default settings.The following settings - Language, NVR ID, Security User Authentication,Security User P/W, Date format, DLS settings, Network settings, HDDoverwrite, Limit recording, HDD serial number, and HDD ERROR time willnot be included.LOADFACTORYDEFAULTPress the button to reset the system to the factory default settings.SOFTWAREUPGRADEUpgrade software to the latest version.After connecting USB flash drive to USB port on the EZPZ NVR, clickSEARCH. It finds the upgrade file automatically. |
Related manuals for Genie EZPZ
manualsdatabase
Your AI-powered manual search engine