Genie Excelerator Manual 

Also see for Excelerator: Manual

Contents

Genie Excelerator Manual  Manual pdf 24 page image

24 For Help, call 1-800-35-GENIE or visit www.geniecompany.comProgramming for 2 or 3 Door Openers (Continued)A Operating 2 or 3 Door Openers:• To move one of the doors.• Enter your PIN.• Press .• Press door opener number ( or or ).SEE NOTE AT TOP OF PREVIOUS COLUMNMOUNTING INSTRUCTIONSThe Keypad must be mounted in sight of the door(s), at least 5 feetabove the ground and clear of any moving door parts.A Mount Keypad.(Mounting screws located insidebattery compartment.)• Remove Battery Cover. See Figure 3.• Drill a 1/16”pilot hole for the top mounting screw.• Install a screw into the drilled hole,leaving a 1/8" gap between thescrew head and the wall.See Figure 2.• Hook the Keypad over the screw.• Mark,drill pilot hole and fastenbottom screw.• Reinstall Battery Cover.Wallscrew head gapFigure 21"8BASIC ADDITIONAL INSTRUCTIONSFORGOT YOUR PIN OR CHANGING YOUR PIN.A Erase old PIN :• Press and hold in order .– Red LED will blink once and turn off.• Release all buttons.B Programming Door Opener(s).• Return to “Programming for 1 Door Opener”or“Programming for 2 or 3 Door Openers.”USING A TEMPORARY PIN.A temporary PIN allows temporary access to your home byrepair persons, meter readers, etc.A Enter your PIN• Press .B Enter the Temporary PIN (from 3 to 8 characters).• Press .NOTE• DO NOT reprogram the Door Opener(s).• Temporary PIN remains active until the next time yournormal PIN is entered.BATTERY CHANGES.If the red LED does NOT blink during use,the batteryneeds to be changed.1 2 34 5 67 8 90DEFGHI JKL MNOPQRS TUV WXYZPROG9VBattery9VBatteryPress hereFigure 3BottomMountingScrewRed LED