Genie GCL-GH Installation Manual

Also see for GCL-GH: Installation supplement Specifications Product guide

5.9www.geniecompany.comIMPORTANTSAFETY INSTRUCTIONSWARNING -To reduce the risk of severe injury or death:1) READ AND FOLLOW ALL INSTRUCTIONS.2) Never let children operate or play with door controls. Keep the remote control (whereprovided) away from children.3) Personnel should keep away from a door in motion and keep the moving door insight until it is completely closed or opened. NO ONE SHOULD CROSS THE PATH OFA MOVING DOOR.4) Test the door’s safety features at least once a month. After adjusting either the forceor the limit of travel, retest the door operator’s safety features.5) For products having a manual release, if possible, use the manual release only whenthe door is closed. Use caution when operating the release while the door is open.Weak or broken springs may cause the door to fall rapidly, causing severe injuryor death.6) KEEP DOOR PROPERLY OPERATING AND BALANCED. See Door Manufacturer’sOwner’s Manual. An improperly operating or improperly balanced door could causesevere injury or death. Have only trained door systems technicians make repairs tocables, spring assemblies, other hardware and any wooden blocks or like items towhich they may be attached.7) SAVE THESE INSTRUCTIONS.208/240V 120V208/240V480/575VSINGLE PHASETHREE PHASEMotorConnectors1) Plug motor harness into proper motor connector on circuit boardin electric box. Fig. 13.2) Apply primary power.Figure 13WARNING:Verify Line Voltage before making any connections to assure thatmotor harness is connected to proper motor connector oncircuit board.DANGER : After power is supplied to the operator, DoNot make contact with components inside the control panelexcept for the Keypad Keys. Fig. 1.Heavy Duty OperatorGCL-GH 06-12