Genie GR-12 Operator's Manual

Also see for Lift Guard GR-12: Service manual Installation instructions Service manual Operator's manual supplement Operator's manual

Contents

Genie GR-12 Operator's Manual Manual pdf 22 page image

Operator's Manual Sixth Edition • Third PrintingInspections20 GR-12 • GR-15 • GR-20 Part No. 133572Pre-operation Inspection Be sure that the operator’s, safety andresponsibilities manuals are complete, legibleand in the storage container located in theplatform. Be sure that all decals are legible and in place.See Inspections section. Check for hydraulic oil leaks and proper oillevel. Add oil if needed. See Maintenancesection. Check for battery fluid leaks and proper fluidlevel. Add distilled water if needed. SeeMaintenance section.Check the following components or areas fordamage, improperly installed or missing parts andunauthorized modifications: Electrical components, wiring andelectrical cables Hydraulic power unit, reservoir, hoses,fittings, cylinders and manifolds Battery pack and connections Drive motors Tires and wheels Ground strap Limit switches, alarms and horn Alarms and beacons (if equipped) Nuts, bolts and other fasteners Platform entry mid-rail bar, chain or gate Sequencing cables and pulleys Pothole guards Lanyard anchorage points Platform extension (if equipped) Work trays (if equipped) Brake release components Battery cover Mast columns and counterweight Platform control joystickCheck entire machine for: Cracks in welds or structural components Dents or damage to machine Excessive rust, corrosion or oxidation Be sure that all structural and other criticalcomponents are present and all associatedfasteners and pins are in place and properlytightened.Note: If the platform must be raised to inspect themachine, make sure that the battery cover is inplace. See Operating Instructions section.