Part No. 39528 Genie GS-1530 & Genie GS-1930 4 - 3Service Manual - First Edition Section 4 - Scheduled Maintenance ProceduresTABLE A PROCEDURESA-3Inspect for Damage and Loose orMissing PartsDaily machine condition inspections are essentialto safe machine operation and good machineperformance. Failure to locate and repair damage,and discover loose or missing parts may result inan unsafe operating condition.1 Inspect the entire machine for damage andimproperly installed or missing parts including:· Electrical components, wiring and electricalcables· Hydraulic power unit, tank, hoses, fittings,cylinders and manifolds· Drive motors· Pothole guards· Scissor pins and retaining fasteners· Scissor components and wear pads· Dents or damage to machine· Tires and wheels· Limit switches, level sensor and alarm· Optional horn (if equipped)· Beacons (if equipped)· Manual brake release components· Platform entry chain or gate· Safety arm· Cracks in welds or structural components· Battery pack and connections· Platform extension· Platform control joystick· Platform railingsA-4Check the Hydraulic Oil LevelMaintaining the hydraulic oil at the proper level isessential to machine operation. Improper hydraulicoil levels can damage hydraulic components. Dailychecks allow the inspector to identify changes inoil level that might indicate the presence ofhydraulic system problems.Perform this procedure with theplatform in the stowed position.1 Visually inspect the oil level in the hydraulictank through the sight gauge in the side of thepower unit module.Result: The hydraulic oil level should be withinthe FULL and ADD marks on the oil level indicatordecal.2 Add oil if necessary. Do not overfill.Hydraulic Oil SpecificationsHydraulic oil type Dexron equivalentHydraulic tank capacity 5.5 gallons20.8 litersHydraulic system 6 gallons(including tank) 22.7 liters
