Part No. 72972 Genie GS-2046 and GS-2646 and GS-3246 3 - 7June 2003 Section 3 • Scheduled Maintenance ProceduresREV B CHECKLIST A PROCEDURESA-3Perform 30 Day ServiceThe 30 day maintenance procedure is a onetimeprocedure to be performed after the first 30 days or40 hours of usage. After this interval, refer to themaintenance tables for continued scheduledmaintenance.1 Perform the following maintenance procedures:· B-3 Inspect the Tires and Wheels(including castle nut torque)· B-10 Replace the Hydraulic TankReturn FilterA-4Grease the Steer YokesGenie specifications require thatthis procedure be performed every100 hours of operation.Regular application of lubrication to the steer yokesis essential to good machine performance andservice life. Continued use of an insufficientlygreased steer yoke will result in componentdamage.1 Locate the grease fitting on the top of the steeryoke.2 Pump multipurpose grease into the steer yokeuntil the steer yoke is full and grease is beingforced past the bearings. Repeat this step forthe other steer yoke.Grease type Multipurpose grease800-610-4101ActionRental.com
