Genie GS-2046 Service Manual
Also see for GS-2046: Operator's manualService and repair manualOperator's manualOperator's manualMaintenance manual
                                                                                                                                                                                                                                            | |
Contents
| 
3 - 14 Genie GS-2046 and GS-2646 and GS-3246 Part No. 72972September 2006Section 3 • Scheduled Maintenance ProceduresREV CCHECKLIST B PROCEDURES®StopaB-7Test the Drive Speed -Stowed PositionProper drive functions are essential to safemachine operation. The drive function shouldrespond quickly and smoothly to operator control.Drive performance should also be free ofhesitation, jerking and unusual noise over theentire proportionally controlled speed range.Perform this procedure with themachine on a firm, level surfacethat is free of obstructions.1 Create start and finish lines by marking twolines on the ground 40 feet / 12.2 m apart.2 Turn the key switch to platform control and pullout the Emergency Stop button to the onposition at both the ground and platformcontrols.3 Lower the platform to the stowed position.4 Models with drive function select button:Press the drive function select button.a drive function select button BN85 Choose a point on the machine; i.e., contactpatch of a tire, as a visual reference for usewhen crossing the start and finish lines.6 Bring the machine to maximum drive speedbefore reaching the start line. Begin timingwhen your reference point on the machinecrosses the start line.7 Continue at full speed and note the time whenthe machine reference point passes over thefinish line. Refer to Section 2,Specifications.800-610-4101ActionRental.com |
Related manuals for Genie GS-2046
manualsdatabase
Your AI-powered manual search engine