Genie GS-2668 DC Operator's Manual

Also see for GS-2668 DC: Operator's manual

Contents

Genie GS-2668 DC Operator's Manual Manual pdf 15 page image

Part No. 82750 Genie GS-2668 DC and Genie GS-3268 DC 13Operator's ManualThird Edition • Third PrintingObserve and Obey:Only routine maintenance items specified in thismanual shall be performed by the operator.Scheduled maintenance inspections shall becompleted by qualified service technicians,according to the manufacturer's specificationsand the requirements specified in theresponsibilities manual.Maintenance Symbols LegendThe following symbols have beenused in this manual to helpcommunicate the intent of theinstructions. When one or more ofthe symbols appear at thebeginning of a maintenanceprocedure, it conveys the meaningbelow.Indicates that tools will be required toperform this procedure.Indicates that new parts will be required toperform this procedure.Check the Hydraulic Oil LevelMaintaining the hydraulic oil at the proper level isessential to machine operation. Improper hydraulicoil levels can damage hydraulic components. Dailychecks allow the inspector to identify changes in oillevel that might indicate the presence of hydraulicsystem problems.Perform this procedure with theplatform in the stowed position.1 Visually inspect the sight gauge located on theside of the hydraulic tank.Result: The hydraulic oil level should be withinthe top 2 inches / 5 cm of the sight gauge.2 Add oil if necessary. Do not overfill.Hydraulic oil specificationsHydraulic oil type Chevron RykonPremium MV equivalentMaintenance