REV DSection 3 • Scheduled Maintenance ProceduresPart No. 82259 GS-3384 3 - 21September 2005B-3Perform Engine Maintenance -Deutz 1011F ModelsEngine specifications require thatthis procedure be performed every250 hours or quarterly, whichevercomes first.Required maintenance procedures and additionalengine information is available in the Deutz 1011FOperation Manual (Deutz part number 0297 9683).Deutz 1011F Operation ManualGenie part number 52883B-4Check the Exhaust SystemMaintaining the exhaust system is essential togood engine performance and service life. Runningthe engine with a damaged or leaking exhaustsystem can cause component damage and unsafeoperating conditions.Bodily injury hazard. Do notinspect while the engine isrunning. Remove the key tosecure from operation.Bodily injury hazard. Beware ofhot engine components. Contactwith hot engine components maycause severe burns.1 Release the latches on the engine tray and fullyslide the engine tray out.2 Insert a 6 inch / 15 cm screwdriver or rod intothe engine tray lock hole located near theengine tray roller wheels to prevent the enginetray from moving.3 Be sure that all fasteners are tight.4 Inspect all welds for cracks.5 Inspect for exhaust leaks; i.e., carbon builduparound seams and joints.CHECKLIST B PROCEDURES
