Genie GTH-644 Operator's Manual
Also see for GTH-644: Service manual
                                                                | |
Contents
|
CONTROLS AND INSTRUMENTSPUMPOFFL OW BRAKEPRESSURE HEADLIGHTS REARWIPERFRONTWIPERWORKLIGHTSPARKINGBRAKEIn addition to the steering wheel, the machine has anothersteering control, the steering selector switch.The steering selector switch (A) is a three-position switch.The three positions are: 4-wheel, 2-wheel , and oblique.Switch positions are selected and function as follows:4-WHEEL Handle rotated forward2-WHEEL Handle directly centeredOBLIQUE (CRAB) Handle rotated rearwardCAUTIONTRANSMISSIONThe transmission control (B) has one lever that controls bothdirectional and speed requirements. It is located on the left sideof the steering column.To shift into Forward gear gently pull the lever toward you andmove the lever upward.To shift into Neutral move the lever to the center position.To shift into Reverse gear gently pull the lever toward you andmove the lever downward.To shift into a lower speed rotate the lever clockwise.To shift into a higher speed rotate the lever counter-clockwise.When shifting the transmission from forward to reverse whilethe machine is in motion the transmission control (B) must bein 1st or 2nd gear only.Forward / 1st Low speed/High torqueForward / 2nd Medium speed/Medium torqueForward / 3rd High speed/Low torqueBefore changing steering selections, make sure all four wheelsare in line. Failure to align the wheels to the proper settingsbefore changing steering positions may cause haphazard steering.This may result in injury to personnel and/or damage to themachine or property.3 - 10ABSTEERING |
Related manuals for Genie GTH-644
manualsdatabase
Your AI-powered manual search engine