Genie IWP Super Series Operator's Manual

Also see for IWP Super Series: Service manual

Contents

16 Genie IWP Super Series Part No. 48643Operator’s Manual Second Edition • Fourth PrintingWorkplace InspectionFundamentalsThe Workplace Inspection helps the operatordetermine if the workplace is suitable for safemachine operation. It should be performed by theoperator prior to moving the machine to theworkplace.It is the operator's responsibility to read andremember the workplace hazards, then watch forand avoid them while moving, setting up andoperating the machine.Do Not Operate Unless:You learn and practice the principles of safemachine operation contained in this operator'smanual.1 Avoid hazardous situations.2 Always perform a pre-operation inspection.3 Always perform function tests prior to use.4 Inspect the workplace.Know and understand the workplaceinspection before going on to the nextsection.5 Only use the machine as it was intended.Be aware of and avoid the following hazardoussituations:· Drop-offs or holes· Bumps and floor obstructions· Debris· Overhead obstructions and high voltageconductors· Hazardous locations· Inadequate surface support to withstand allload forces imposed by the machine· Wind and weather conditions· All other possible unsafe conditions