2 - 4 S-60 • S-65 • S-60 HC Part No. 77828Section 2 • Specifications February 2012Function manifoldSystem relief valve pressure 3000 psi207 barSteer flow regulator 3.5 gpm13.2 L/minJib boom / platform rotate 0.6 gpmflow regulator 2.27 L/minOscillate relief valve pressure (@ 2500 rpm) 800 psi55 barDrive manifoldHot oil relief valve pressure 280 psi19.3 barDrive motors, 4WD modelsDisplacement per revolution, 0.79 cu inhigh speed 13 ccDisplacement per revolution, 1.83 cu inlow speed 30 ccDrive motors, 2WD modelsDisplacement per revolution, 1.28 cu inhigh speed 20.9 ccDisplacement per revolution, 2.14 cu inlow speed 35 ccHydraulic filtersHigh pressure filter Beta 3 ≥ 200High pressure filter 51 psibypass pressure 3.5 barMedium pressure filter Beta 3 ≥ 200Medium pressure filter 51 psibypass pressure 3.5 barHydraulic return filter 10 micron with25 psi / 1.7 bar bypassManifold ComponentSpecificationsPlug torqueSAE No. 2 36 in-lbs / 4 NmSAE No. 4 10 ft-lbs / 13 NmSAE No. 6 14 ft-lbs / 19 NmSAE No. 8 38 ft-lbs / 51 NmSAE No. 10 41 ft-lbs / 55 NmSAE No. 12 56 ft-lbs / 76 NmValve coil resistance specificationsSolenoid valve, 3 position 4 way, 10V DC 5 to 7Ω(schematic items D, V and Y)Solenoid valve, 3 position 4 way, 10V DC 4 to 6Ω(schematic item BB)Solenoid valve, 2 position 3 way, 10V DC 5 to 7Ω(schematic items B, C, E, F and FF)Solenoid valve, 2 position 3 way, 10V DC 5.5 to 7.5Ω(schematic items KK and LL)Proportional solenoid valve, 12V DC 4 to 6Ω(schematic items M and T)Proportional solenoid valve, 12V DC 3.7 to 5.7Ω(schematic item Q)SPECIFICATIONSContinuous improvement of our products is aGenie policy. Product specifications are subjectto change without notice.
