Genie S-65 TRAX Operator's Manual

Also see for S-60 HC: Maintenance manual Operator's manual Operator's manual Service manual Operator's manual

Contents

Genie S-65 TRAX Operator's Manual Manual pdf 52 page image

Operator's Manual Third Edition • Second Printing50 S-60 TRAX • S-65 TRAX Part No. 227285Transport and Lifting InstructionsFree-wheel Configuration forWinchingChock the tracks to prevent the machine fromrolling.Release the trackbrakes by turning overall four drive hubdisconnect caps.Be sure the winch lineis properly secured tothe drive chassis tiepoints and the path isclear of allobstructions.Reverse the procedures described to re-engage thebrakes.DisengageEngageObserve and Obey:Genie Industries provides this securementinformation as a recommendation. Drivers aresolely responsible for making sure machinesare properly secured and the correct trailer isselected pursuant to US Department ofTransportation regulations, other localizedregulations, and their company policy.Genie customers needing to containerize any liftor Genie product should source a qualifiedfreight forwarder with expertise in preparing,loading and securing construction and liftingequipment for international shipment.Only qualified aerial lift operators should movethe machine on or off the truck.The transport vehicle must be parked on a levelsurface.The transport vehicle must be secured toprevent rolling while the machine is beingloaded.Be sure the vehicle capacity, loading surfacesand chains or straps are sufficient to withstandthe machine weight. Genie lifts are very heavyrelative to their size. See the serial label for themachine weight. See the Decals section for theserial label location.Be sure the turntable is secured with theturntable rotation lock before transporting. Besure to unlock the turntable for operation.Do not drive the machine on a slope thatexceeds the uphill, downhill or side slope rating.See Driving on a Slope in the OperatingInstructions section.If the slope of the transport vehicle bed exceedsthe uphill or downhill maximum slope rating, themachine must be loaded and unloaded using awinch as described. See the Specificationssection for the slope ratings.