Operator's Manual Fifth Edition • Third PrintingS-80 • S-85 Part No. 1000231Copyright © 1994 by Genie IndustriesFirst Edition: Fifth Printing, October 1996Second Edition: Fifth Printing, July 2000Third Edition: Third Printing, October 2002Fourth Edition: Third Printing, July 2004Fifth Edition: Third Printing, May 2006"Genie" is a registered trademark ofGenie Industries in the U.S.A. and many othercountries. "S" is a trademark of Genie Industries.These machines comply withANSI/SIA 92.5-1992.Printed on recycled paperPrinted in U.S.A.ImportantRead, understand and obey these safety rules andoperating instructions before operating this machine.Only trained and authorized personnel shall bepermitted to operate this machine. This manualshould be considered a permanent part of yourmachine and should remain with the machine at alltimes. If you have any questions, call Genie Industries.ContentsPageSafety Rules .............................................................. 1Controls ..................................................................... 8Legend ...................................................................... 11Pre-operation Inspection ........................................... 12Maintenance ............................................................. 14Function Tests .......................................................... 18Workplace Inspection ................................................ 24Operating Instructions ............................................... 25Transport and Lifting Instructions .............................. 31Decals ...................................................................... 34Specifications ........................................................... 38Contact us:Internet: http://www.genielift.come-mail: techpub@genieind.com