Genie S-80 Operator's Manual

Also see for S-80: Maintenance manual Maintenance manual Maintenance manual Operator's manual Operator's manual

Contents

Genie S-80 Operator's Manual Manual pdf 40 page image

Operator's Manual Fifth Edition • Third Printing38 S-80 • S-85 Part No. 1000231SpecificationsModel S-80Height, working maximum 86 ft 26.2 mHeight, platform maximum 80 ft 24.4 mHeight, stowed maximum 9 ft 2 in 2.79 mHorizontal reach maximum 72 ft 5 in 22.1 mWidth, axles retracted 8 ft 2.44 mLength, stowed 37 ft 3 in 11.35 mMaximum load capacity 600 lb 272 kg6 foot platformMaximum load capacity 500 lb 227 kg8 foot platformMaximum load capacity 750 lb 340 kgwith foam-filled tiresand proper counterweight configurationMaximum wind speed 28 mph 12.5 m/sWheelbase 9 ft 0 in 2.7 mTurning radius (outside) 23 ft 7.0 mTurning radius (inside) 10 ft 8 in 3.3 mTurntable tailswing 3 ft 8 in 1.12 mTurntable rotation (degrees) continuousControls 12V DC proportionalPlatform dimensions, 72 in x 30 in 1.8 m x 76 cm6 foot (length x width)Platform dimensions, 96 in x 36 in 2.4 m x 91 cm8 foot (length x width)Platform leveling self-levelingPlatform rotation 160°AC outlet in platform standardHydraulic pressure, maximum 3000 psi 207 bar(boom functions)System voltage 12VTire size 15-22.5 SATHigh flotation tire size 41/18LL x 22.5, 14 plyGround clearance 11 in 28 cmFuel tank capacity 33 gallons 125 litersWeight See Serial Label(Machine weights vary with option configurations)Airborne noise emissions 80 dBMaximum sound level at normal operating workstations(A-weighted)Drive speedsDrive speed, stowed 3.5 mph 5.6 km/h40 ft/7.8 sec 12.2 m/7.8 secDrive speed, 0.68 mph 1.1 km/hraised or extended 40 ft/40 sec 12.2 m/40 secMaximum slope rating, stowed position, 2WDCounterweight uphill 30% (17°)Counterweight downhill 15% (9°)Side slope 25% (14°)Maximum slope rating, stowed position, 4WDCounterweight uphill 45% (24°)Counterweight downhill 30% (17°)Side slope 25% (14°)Note: Slope rating is subject to ground conditions andadequate traction.Floor loading informationTire load, maximum 16,000 lbs 7255 kgTire contact pressure 100 psi 7.03 kg/cm2689 kPaOccupied floor pressure 282 psf 1377 kg/m213.5 kPaNote: Floor loading information is approximate anddoes not incorporate different option configurations.It should be used only with adequate safety factors.Continuous improvement of our products is a Geniepolicy. Product specifications are subject to changewithout notice or obligation.

/ 43

Related manuals for Genie S-80