Genie Super Tower ST-20 Parts & Service Manual

Also see for Super Tower ST-20: Operator's manual

Genie Super Tower ST-20 Parts & Service Manual Manual pdf 16 page image

3 - 2 Genie Super Tower Part No. 32951November 2005Section 3 • Scheduled Maintenance ProceduresMaintenance Symbols LegendThe following symbols have beenused in this manual to helpcommunicate the intent of theinstructions. When one or more ofthe symbols appear at thebeginning of a maintenanceprocedure, it conveys the meaningbelow.Indicates that tools will be required toperform this procedure.Indicates that new parts will be requiredto perform this procedure.Indicates that dealer service will berequired to perform this procedure.SCHEDULED MAINTENANCE PROCEDURESPre-delivery Preparation ReportThe pre-delivery preparation report containschecklists for each type of scheduled inspection.Make copies of thePre-delivery PreparationReport to use for each inspection. Store completedforms as required.Maintenance ScheduleThere are three types of maintenance inspectionsthat must be performed according to a schedule—daily, quarterly and annual. TheScheduledMaintenance Procedures Section and theMaintenance Inspection Report have been dividedinto three subsections—A, B and C. Use thefollowing chart to determine which group(s) ofprocedures are required to perform a scheduledinspection.Inspection ChecklistDaily or every 8 hours AQuarterly or every 250 hours A + BAnnual or every 1000 hours A + B + CMaintenance Inspection ReportThe maintenance inspection report containschecklists for each type of scheduled inspection.Make copies of theMaintenance Inspection Reportto use for each inspection. Store completed formsfor three years.