Genie TZ-50 Operator's Manual

Also see for TZ-50: Service manual Servise manual Operator's manual Operator's manual

Contents

Genie TZ-50 Operator's Manual Manual pdf 15 page image

Part No. 82900 Genie TZ-50 13Operator's ManualFirst Edition • Sixth PrintingMaintenanceObserve and Obey:Only routine maintenance items specified in thismanual shall be performed by the operator.Scheduled maintenance inspections shall becompleted by qualified service technicians,according to the manufacturer's specificationsand the requirements specified in theresponsibilities manual.Maintenance Symbols LegendThe following symbols have beenused in this manual to helpcommunicate the intent of theinstructions. When one or more ofthe symbols appear at thebeginning of a maintenanceprocedure, it conveys the meaningbelow.Indicates that tools will be required toperform this procedure.Indicates that new parts will be requiredto perform this procedure.Check the BatteriesProper battery condition is essential to goodmachine performance and operational safety.Improper fluid levels or damaged cables andconnections can result in component damage andhazardous conditions.This procedure does not need tobe performed on machines withsealed or maintenance-freebatteriesElectrocution hazard. Contact withhot or live circuits could result indeath or serious injury. Remove allrings, watches and other jewelry.Bodily injury hazard. Batteriescontain acid. Avoid spilling orcontacting battery acid. Neutralizebattery acid spills with baking sodaand water.1 Put on protective clothing and eye wear.2 Be sure that the battery cable connections aretight and free of corrosion.3 Be sure that the battery hold-down brackets aresecure.4 Remove the battery vent caps.5 Check the battery acid level. If needed,replenish with distilled water to the bottom of thebattery fill tube. Do not overfill.6 Install the vent caps.