Genie TZ-50 Operator's Manual

Also see for TZ-50: Service manual Servise manual Operator's manual Operator's manual

Contents

Genie TZ-50 Operator's Manual Manual pdf 30 page image

28 Genie TZ-50 Part No. 82900Operator's Manual First Edition • Sixth PrintingTransport and Lifting InstructionsObserve and Obey:The transport vehicle must be parked on a levelsurface.The transport vehicle must be secured toprevent rolling while the machine is beingloaded.Be sure the vehicle capacity, loading surfacesand chains or straps are sufficient to withstandthe machine weight. See the serial plate for themachine weight.Securing to Truck or Trailer forTransitFully lower and retract the boom. Make sure theboom and the mid-pivot rest securely in the mastcradles.Securely latch the boom hold-down latches.Raise all four outriggers to the stowed position.Always chock the machine wheels in preparationfor transport.Turn the key switch to the off position and removethe key before transporting.Inspect the entire machine for loose or unsecureditems.Securing the ChassisPlace a block under the tongue.Place a block underneath the axle between the twowheels.Use the four tie-down points on the chassis foranchoring down to the transport surface.Use chains or straps of ample load capacity.Use a minimum of 4 chains to secure the chassis.Secure a strap over the tongue of the machine.Adjust the rigging to prevent damage to the chains.