Genie TZ-50 Servise Manual

Also see for TZ-50: Operator's manual Service manual Operator's manual Operator's manual

Genie TZ-50 Servise Manual Manual pdf 92 page image

REV APart No. 84577 Genie TZ-50/30 4 - 43November 2004 Section 4 • Repair Procedures11-1Hydraulic and MechanicalBrakesHydraulic Brake System -ANSI ModelsRepair procedures and additional axle information isavailable in the Dexter Axle Operation MaintenanceService Manual(Dexter part number LIT-001-00).Dexter Axle Operation Maintenance Service ManualGenie part number 84376Mechanical Brake System -CE ModelsRepair procedures and additional axle information isavailable in the KNOTT Axle Service Manual(KNOTT part number P005).KNOTT Axle Service ManualGenie part number 8444311-2Parking BrakeHow to Adjust the Parking BrakeANSI models:1 Adjust the brakes. Refer to the Dexter AxleOperation Maintenance Service Manual(Dexter part number LIT-001-00).Dexter Axle Operation Maintenance Service ManualGenie part number 843762 Chock the wheels.3 Release the parking brake.4 Loosen the set screw at the side of the parkingbrake handle.5 Adjust the handle just to the point where it isdifficult to apply the parking brake, then rotatethe top of the parking brake handlecounterclockwise one full turn.6 Tighten the set screw. Do not over tighten.7 Engage the parking brake. Attempt to move themachine.Result: The parking brake should prevent themachine from moving. If the parking brake doesnot prevent the machine from moving, repeatthis procedure beginning with step 1.CE models:Required maintenance procedures and additionalaxle information is available in the KNOTT AxleService Manual (KNOTT part number P005).KNOTT Axle Service ManualGenie part number 84443Trailer Components