Genie WIP1VD User Manual

Also see for WIP1VD: Quick start guide

15Network Camera User Manual4.3 Alarm ConfigurationAlarm configuration includes four submenus: Motion Detection Area, Motion DetectionTrigger, Motion Detection Schedule and Alarm Server.4.3.1 Motion Detection Area1. Go to “Alarm configuration” “Motion Detection Area” to see an interface as below.2. Move the “Sensitivity” scroll bar to set up the motion trace sensitivity.3. Check the “Add”, press the “Ctrl” button and move mouse to select the motion detectionarea. Select “Erase” and move the mouse to clear all motion detection area.4. Press the “Save” button to save the settings.4.3.2 Motion Detection Trigger1. Go to “Alarm Configuration”  “Motion Detection Trigger” to display an interface asshown below.2. Check “Enable alarm” check box. Then all functions under this interface will be activated.3. Trigger Email: Check “Attach picture” and the triggered snap pictures will be sent into theaddress.4. Trigger FTP: Check “Uploading picture”. Then the triggered snap pictures will be sent intoFTP server address. Please refer to FTP configuration chapter for more details.5. Press the “Save” button to save the settings.