Genie WIP1VD User Manual

Also see for WIP1VD: Quick start guide

2Network Camera User Manual2 IE Remote AccessYou may connect IP-Cam via LAN or WAN. Here only take IE browser (6.0) for example.The details are as follows:2.1 LANIn LAN, there are two ways to access IP-Cam: 1. access through IP-Tool; 2. directly accessthrough IE browser.2.1.1 Access through IP-ToolNetwork connection:① Make sure the PC and IP-Cam are connected to the LAN and the IP-Tool is installed in thePC from the CD.② Double click the IP-Tool icon on the desktop to run this software as shown below:③ Modify the IP address. The default IP address of this camera is 192.168.226.201. Click theinformation of the camera listed in the above table to show the network information on theright hand. Modify the IP address and gateway of the camera and make sure its networkaddress is in the same local network segment as the computer’s. Please modify the IP addressof your device according to the practical situation.